FAAE Technical Workshop

Wednesday, October 29, 2008

NEW YORK - To all Engineers in the tri-state area. The Filipino American Association of Engineers (FAAE), will be conducting a Technical Workshop on November 8, 2008 from 8:00 AM to 4:00 PM at the Philippine Consulate Building, 556 Fifth Ave. New York, NY 10036, (Between 45th & 46th Street) FREE BREAKFAST and LUNCH “FILIPINO DISH” will be served. Seminar Fee is $10.00. Seminar is subsidized by FAAE, and Certificate of Attendance will be distributed after the seminar. Certificate of PDH credits will be provided by accredited vendors. A “MUST” FOR ENGINEERS AND YOU ARE ALL WELCOME!!! Please bring your business cards and we will appreciate very much if you come in business attire.
For seminar details and reservation, please call:
Fred Taruc - 917 365 7007
Tante Palad - 201 773 6009
Arnel Suarez - 212 404 5822
Pete Bonus - 212 613 8842

http:://www.filam-engineers.org

source: filipinoreporter.com

Read more...

Joke Time

Monday, October 20, 2008


A short story of a Filipino boy in school.

It was the first day of school in Washington, DC and a new student named Dagohoy, the son of a Filipino immigrant, entered the fourth grade.

The teacher began, "Let's review some American history, class. Who said
'Give me liberty or give me death?'" She saw a sea of blank faces, except for Dagohoy's who had his hand up, "Patrick Henry, 1775." "Very good," said the teacher.

"Who said 'Government of the people, by the people,and for the people shall not perish from the earth'"? Again, no response except from Dagohoy:
"Abraham Lincoln, Gettysburg, 1863," he said.

The teacher snaps at the class, "Class, you should be ashamed, Dagohoy who
is new to our country knows more about our history than you do."

She hears a loud whisper from the back: "Screw the Filipinos." "Who said that?" she demanded. Dagohoy put his hand up.
"General John Pershing, Manila, 1896."

At that point, Jack, another student says, "I'm going to puke."

The teacher glares and asks, "All right! Now who said that?" Again Dagohoy answers, "George Bush, Sr. to the Japanese Prime Minister during the state dinner, Tokyo, 1991."

Now furious another student yells, "Oh yeah? Suck this!!" Dagohoy jumps out of his chair waving his hand and shouts to the teacher at the top of his voice,
"Bill Clinton to Monica Lewinsky, the Oval Office, 1997!!"

Someone shouts, "You little shit if you say anything else, I'll kill you."
Dagohoy yells, "Congressman Gary Condit to Chandra Levy, Washington, D.C., 2001!"

The teacher faints. "I'm outta here!" mutters one student as he sidles to the door.
"President Gloria Macapagal Arroyo, Baguio City, December 30, 2002!!" Dagohoy responds.

As the class gathers around her on the floor, someone says, "Oh shit, now we're really in big trouble!"
"Saddam Hussein, on the Iraq invasion, Bhagdad, May 2003!" Dagohoy bellowed.

"Now, I really have to run," Jack mutters, heading for the exit.,
"Gloria Macapagal Arroyo again, Pampanga, October 4, 2003!!!" Dagohoy shouts
triumphantly jumping with glee.

Then a burly African-American boy grabbed Dagohoy and strangled him, about to give a fistful to a frightened Dagohoy.

Then an Asian boy stood up and shouted, "Hey easy on him. I'M A FILIPINO!"
Dagohoy then blurted out before he got socked out,
"Fernando Poe, Jr. Manila, January 2004!!!


Here's another one...

A first-grade teacher was having trouble with one of her students, the teacher asked the boy, "What is your problem?"

Boy answered, "I'm too smart for the first-grade. My sister is in the third-grade and I'm smarter than she is! I think I should be in the third-grade too!"

The Teacher had enough. She took the Boy to the principal's office.

While the boy waited in the outer office, the teacher explained to the principal what the situation was. The principal told the teacher he would give the boy a test and if he failed to answer any of his questions he has to go back to the first-grade and behave. She agreed.

Boy was brought in and the conditions were explained to him and he agreed to take the test.

Principal: "What is 3 x 3?"
Boy: "9".

Principal: "What is 6 x 6?"
Boy: "36".

And so it went with every question the principal thought a third-grade should know. The principal looks at the teacher and tells her, "I think this boy can go to the third-grade. "

The teacher says to the principal, "I have some of my own questions.
Can I ask him ?"

The principal and the boy both agreed.

The teacher asks, "What does a cow have four of that I have only two of?"
Boy: after a moment, "Legs."

Teacher : "What is in your pants that you have but I do not have?"
Boy: "Pockets."

Teacher : "What starts with a C and ends with a T, is hairy, oval, delicious and contains thin whitish liquid?"
Boy: Coconut

Teacher: What goes in hard and pink then comes out soft and sticky?

The principal's eyes open really wide and before he could stop the answer, the Boy was taking charge.

Boy: Bubblegum

Teacher: What does a man do standing up, a woman does sitting down and a dog does on three legs?

The principal's eyes open really wide and before he
could stop the answer...

Boy: Shake hands

Teacher: Now I will ask some "Who am I" sort of questions, okay?
Boy: Yep.

Teacher: You stick your poles inside me. You tie me down to get me up. I get wet before you do.
Boy: Tent

Teacher: A finger goes in me. You fiddle with me when you're bored. The best man always has me first.

The Principal was looking restless, a bit tense.

Boy: Wedding Ring

Teacher: I come in many sizes. When I'm not well, I drip. When you blow me, you feel good.
Boy: Nose

Teacher: I have a stiff shaft. My tip penetrates. I come with a quiver.
Boy: Arrow

Teacher: What word starts with a 'F' and ends in 'K' that means lot of heat and excitement?
Boy: Firetruck

Teacher: What is it that all men have one of, it's longer on some men than on others, the pope doesn't use his and a man gives it to his wife after they're married?
Boy: SURNAME

Teacher: What part of the man has no bone but has muscles, has lots of veins, like pumping, & is responsible for making love?
Boy: HEART.

The principal breathed a sigh of relief and said to the teacher:

"SEND THIS BOY TO COLLEGE!, I GOT THE LAST TEN QUESTIONS WRONG MYSELF !"

Read more...

AutoCAD Tips

Thursday, October 16, 2008

Electricity gone! What will happen to drawing?
When using AutoCAD, sometimes we are very concentrated on the drawing and forget to save. This is a very common mistake done by inexperienced users as well as advanced users. We forgot to save the file for a long time and the electricity went off… what will happen then!? You may say that you have a UPS unit and you are not affected from electric cut-offs. However, sometimes UPS units may not be activated immediately and the computer may shut down. Or maybe the electricity did not go but you computer suddenly frozen. Does anyone have a computer which does not freeze all of a sudden? In such a case, what will happen to the project that we are currently working on? We generally understand the value of our data when we lose them. All of the work that you have done so far suddenly becomes very valuable.

Most of the programs like AutoCAD, word has automatic saving features in order to compensate such cases. All of the work you have been doing is saved automatically at every 10 minutes as default. In order to activate this feature, you can use Tools/Options from the menu.

As you can see from the figure above, “Automatic Save” is selected and is set to 5 (1). This setting means that your work will be saved automatically at every 5 minutes. In addition to this, if you select “Create backup copy with each save“(2) option, then another backup file that has “.bak” extension is created at every time file is saved. You can use the “Drawing1.bak“ file as shown below, in case there is a problem during the saving operation or the original file is damaged so that it cannot be recovered. However, this file is not opened directly as you double click on the file or try to open it by using File/Open in AutoCAD.

How to open “.bak” file in AutoCad? First, we have to change its extension. Select the file, then press F2 or make a single click on its name and wait for 1-2 seconds. You will see that you can change the name of the file. After that, change its extension to “.dwg”. Now, we can open the file in AutoCAD.
If you didn’t change the Windows folder options, “.dwg” is not visible. In order to open it, you must select folder options from the tools menu. Then, you should cancel the option shown below.

Another bad scenario is that, we did not save the file at all not even once but AutoCAD saved it automatically with constant intervals and the bad thing happened, AutoCAD became frozen. How can we recover our work in such a case? Due to the fact that the file has not been saved, AutoCAD saves it to the temporary folder (Temp). In order to access to this folder, enter start/run, then write %TEMP% and press enter. Temporary folder that is used by Windows is opened automatically. You will see such a file that is shown below. Change extension of this file to “.dwg” and then you can recover your work by opening this file in AutoCAD.
More Tips at DailyAutoCAD.com

Read more...

  © Blogger template Writer's Blog by Ourblogtemplates.com 2008

Back to TOP